1 / 4
Virus checked
v0 latest
Free Mod
Apex Guidance
–
Rating
0 Ratings
0
Downloads
77
Views
0
Thanks
Precision guidance, section control and field records for Farming Simulator.
Apex Guidance puts a single in-cab terminal at your fingertips that handles every job a real GPS system does — straight AB lines, headland management, automatic section shutoff, tramlines, and a complete record of everything that happened on every field.
Guidance:
Set an AB line by simply driving it, or let Apex Guidance read one straight from a recorded field edge and offset it into the crop by any amount. Tracks are numbered automatically, snap to the nearest one, and can be nudged sideways in tenths of a metre without losing the grid.
Boundaries and Obstacles:
Drive the field edge once — it's recorded, saved and reused for every future job. Ponds, pylons and tree islands are captured the same way. Each obstacle gets its own headland ring at your set working width. The implement lifts and lowers around them just like at the field edge, and in guidance mode proper passes are generated to follow around them.
Headlands:
Three modes to choose from:
• Warn – flags the approach, no automation
• Auto – lifts and lowers the implement for you
• Guidance – generates headland passes and steers them automatically, around the field and around every obstacle, always picking the nearest pass
Lift and lower points are set in metres from the line — before it, after it, or exactly on it. A headland overlap setting moves the entire joint with a single value instead of four.
Section Control:
Both ends of the working width are measured against the boundary every frame, so the side that reaches it first shuts off first. Progressive, stepped, and reliable around curves and corners where angle-based systems fail. Manual left and right shutoff from the outside in is also available.
Tramlines:
Automatic lane counting from the AB line, with a manual mode for headland passes. Adjustable spacing, width, and distance behind the machine.
Auto Turn:
Headland turns are generated from your own machine's geometry, with skips of up to five rows. Every generated path is verified against the target track before use. Self-driven turns can be recorded and are automatically preferred when they match the row spacing better than a generated one.
Records:
Per field, per commodity: seed, fertiliser, lime and spray by weight and volume, yield in tonnes, and total input cost. Accumulates across sessions and survives reloads.
Coverage:
Worked ground is painted live and area is counted — and the paint respects the sections, so areas you shut off over are not counted as done.
Apex Guidance puts a single in-cab terminal at your fingertips that handles every job a real GPS system does — straight AB lines, headland management, automatic section shutoff, tramlines, and a complete record of everything that happened on every field.
Guidance:
Set an AB line by simply driving it, or let Apex Guidance read one straight from a recorded field edge and offset it into the crop by any amount. Tracks are numbered automatically, snap to the nearest one, and can be nudged sideways in tenths of a metre without losing the grid.
Boundaries and Obstacles:
Drive the field edge once — it's recorded, saved and reused for every future job. Ponds, pylons and tree islands are captured the same way. Each obstacle gets its own headland ring at your set working width. The implement lifts and lowers around them just like at the field edge, and in guidance mode proper passes are generated to follow around them.
Headlands:
Three modes to choose from:
• Warn – flags the approach, no automation
• Auto – lifts and lowers the implement for you
• Guidance – generates headland passes and steers them automatically, around the field and around every obstacle, always picking the nearest pass
Lift and lower points are set in metres from the line — before it, after it, or exactly on it. A headland overlap setting moves the entire joint with a single value instead of four.
Section Control:
Both ends of the working width are measured against the boundary every frame, so the side that reaches it first shuts off first. Progressive, stepped, and reliable around curves and corners where angle-based systems fail. Manual left and right shutoff from the outside in is also available.
Tramlines:
Automatic lane counting from the AB line, with a manual mode for headland passes. Adjustable spacing, width, and distance behind the machine.
Auto Turn:
Headland turns are generated from your own machine's geometry, with skips of up to five rows. Every generated path is verified against the target track before use. Self-driven turns can be recorded and are automatically preferred when they match the row spacing better than a generated one.
Records:
Per field, per commodity: seed, fertiliser, lime and spray by weight and volume, yield in tonnes, and total input cost. Accumulates across sessions and survives reloads.
Coverage:
Worked ground is painted live and area is counted — and the paint respects the sections, so areas you shut off over are not counted as done.
Comments
You must be logged in to comment.
No comments yet.