Hall Configurator

Have you ever wanted to build your own hall in the game? Now you can not only design it, but also construct it entirely yourself using building materials from your own farm! With this package, both are possible!

Since the process can be a bit complex, it's recommended to try it out in a test savegame first to avoid losing money on your main farm. Remember to activate Free Mode before placing anything, otherwise you might damage the construction site!

To ensure all building parts fit precisely, they are created without terrain adaptation. Use the four different “Leveler” blocks to flatten the terrain. These have no base cost or maintenance and should be removed after placement.

How to proceed:

• After leveling, place the gable walls first
• Then the roof
• Finally, the side walls – this prevents gaps

It's recommended to use Grid Mode only and place buildings at a 90° angle to the map to avoid overlaps. Ensure not to target the previous module when placing, as this would cause them to be placed on top of each other.

For wider construction projects, the Leveler modules should be placed with some overlap to better visualize height differences. These must be hidden after a certain distance to preserve performance, as required by ModHub.

ModHub also requires that Test Areas and Level Areas are included in the mod. So: activate Free Mode before placing anything!

General tips and notes:

• Be careful when placing the Modules. Placing them too fast can cause problems with the in-game physics.
• Level the ground with the Levelers first, then sell them.
• Activate Free Mode when placing.
• You cannot tip materials inside the halls.
• Roofs only show visual snow, no mesh.
• AI should not be started inside or near the halls.
• AI cannot drive into them.
• The triggers for manual building are intentionally small – precise driving is required.
• Each module can be built manually. One construction phase takes about 8 hours to complete.

Every module has the same basic structure.

• Price: $3,000 – $10,000 depending on the module.
• Price: $30 – $100 depending on the module when self-built.
• Maintenance: $1/day.
• Dimensions: 5m x 5m.
• Color selection for wooden walls and gates.

The models can be found in the buildings tab, or if you want to build them yourself, in the constructibles tab.

Almost every module can be configured in 5 different heights. Note: Some modules were not built in all heights if it didn’t make structural sense.

Modules are divided into 4 groups:

• Walls:
• Open side (also extended version)
• Closed side (also extended version)
• Window (also extended version)
• Door
• Segment gate
• Double width for segment gates and open walls -> Coming Soon
• Roofs:
• Gable roof
• Flat roof
• Sloping canopy
• Rising canopy
• Roof corners, also inverted version
• With skylight/roof window and hall lighting -> Coming Soon
• Roof Edge - ! Only this can't be constructed. Just placed
• Gable walls:
• In 3 sizes, configurable with gate, window, or none
• Variable gable walls:
• Outer parts
• Inner parts
• Flat roof
• Flat roof with gate
• Gable roof
• Gable roof with gate -> Coming Soon

There are also additional free modules:

• Workshop (find it in the "tools" tab)
• Bale storage (find it in the "silos" tab)
• Pallet storage (find it in the "silos" tab)

In the first version, almost the same modules will be included as in LS22. However, the new feature is that all of them can now be both placed and manually built.