IH 6200 Pack

IH 6200 Grain Drill: Operating Instructions

The IH 6200 is a versatile, trailed seed drill. To operate it correctly, follow these sequential steps:

1. Hitching the Machine: First, back your tractor up to the implement and press the [Q] key (default hitch key) to connect the seed drill to the tractor.
2. Switching to Transport/Work Mode: Since these drills are often used in tandem (side-by-side), you need to unfold or convert the machine for field use. Press the [X] key to unfold the drill or change its configuration. If you are using a hitch frame (hitching on the "other side"), ensure the machine is properly aligned with the field rows.
3. Lowering the Coulters: Once you are positioned at the start of your field, you must lower the seeding units into the ground. Press the [V] key to lower the coulters. Note: The machine will only sow seeds if the units are in the "down" position.
4. Activating the Seed Drill: Finally, you need to engage the mechanical drive of the machine. Press the [B] key to turn on the seed drill. Ensure you have selected the correct seed type before you start driving.