
The Lely Welger Tornado winding combination of xyz spain now for LS13 and real silage bales.
Not only converts to LOGFEHLERFREI LS13 but also thoroughly revised.
The operation has been significantly cleaned up and the scripts made LS13-capable. I also could not help but incorporate some improvements.
The tornado runs as in LS11 on the standard LS script, so produces real-LS13 bales.
In addition, the winding combination uses the new opportunities LS13 data structure for bales as genuine content and quantity of fruit.
The BALE PRESS produced from grass and hay (for ease of processing with the standard feed mixer).
Wheat and barley straw be compressed to the appropriate straw bales. All other Schwadfrüchte be converted in preparation for new fruit varieties to wheat straw.
The winding combination was much easier to use.
To wrap bales now brings for the first time in the game real benefits:
Straw bales are better preserved by wrapping. To simulate the reduced losses to the available amount of straw bales increased by 20%.
Hay and grass bales, however, to be REAL SILAGE BALES! I.e. if you give these bales in the feed mixer, then its content will be counted as silage.
This works also in Courseplay, but you have to watch that you're not pressed bales faster than the combined might wrap.
MP is not tested, should work on the basis of MP-capacity output of all scripts, however. With understandable feedback for error descriptions I am grateful.
Or what is still missing: Variable bale chamber size (real feature of the Tornado). In addition, the script for the turn tiller is currently disabled.
The mod consists of TWO ZIP files. Along with the actual mod from baler and wrapper there is a small ZusatzMOD "MultiBale". Whose function is solely as a guide to save and load the contents into a little ball and orderly paths collide in any way with the normal LS13 scripts.
Comments113
You must be logged in to comment.
bei mir geht die presse irgendwie nicht in LS rein bitte um hilfe !:(
Ist der Mod auch MP tauglich???
Also, der Mod ist klasse. Es ist schon richtig, dass die Presse die Trecker aushebelt. Ich hab den alten Unimog davor damit gehts. Trotzdem wäre ich dir dankbar, wenn du das nochmal überarbeiten könntest. Die Funktionen sind einwandfrei und wie du es beschrieben hast, Logfehler frei. Es ist wirklich eine sehr gute Arbeit und dafür möchte ich mich bedanken. Bitte weiter so.
WoW! Lob an den moder!
wenn ich gras presse und wickel kommt bei mir stroh raus
Super Mod funktioniert einwand frei aber währe echt super wenn du in der V2 den Anhänge punkt verändern kannst damit man besser um die Kurve kommt Ansonsten echt super mod
Guter Mod aber man brauch schon einen starken Trecker Mein Fendt machte einen hochstarter mit einem 2 tonne
mit abstand die beste presse, die ich je hatte, die wickelanimation ist mehr als einfach nur der hammer.... nur leider werden die ballen auf der standartgabel nicht attacht, was das laden im mp fast unmöglich macht, das fahrverhalten ist mieserabel, da gibts noch gut nachholbedarf... deshalb leider nicht mehr als 4 sterne...
Wie isn das mit demm verkaufen der Ballen?
Ist zwar für die Ursus Ballenpresse aber ist ja das gleiche: https://www.youtube.com/watch?v=I6Ggy2DS3UE
Kann man mal so ne Presse bauen die dann wenn man gras presst und wickelt dass dann aus dem gras Silage wird Des wär richtig geil sag schonmal danke!!
Ähm Halloooo??? Beschreibung gelesen??? Das macht die Presse doch. Also wer lesen kann ist doch klar im Vorteil. :D "Heu- und Grasballen hingegen werden zu ECHTEN SILAGEBALLEN! D.h. wenn man diese Ballen in den Futtermischwagen gibt, dann wird ihr Inhalt als Silage angerechnet."
Also habs mal getestet. Finger Weg von der Presse die Zerschiesst Spielstände !!! Vorsicht an alle die schon X Sunden gespielt haben. V2 muss DINGEND her !!! Sonst soweit nicht schlecht
Super mod Wäre toll wenn man es beim Händler anbringen würde dass gewickelte Heuballen zu Silage wird
Also 1, vorschlag die pickup hängt manch mal am boden fest
Ein Topmod !! DANKE und weiter so