Manual Hydraulic Control

CManual Hydraulic Control allows you to manually raise and lower the hydraulic lifts of your implements – just like in real life. You can hold them at any desired height and adjust them steplessly.

This feature is especially useful for low shed entrances, as you can lower the implement slightly to clear the opening. When plowing, you can fully lower the plow to properly engage it in the soil.

The base-game V key function for raising and lowering remains available, allowing for a hybrid control style.

Features at a glance:

• Stepless height adjustment: Manual control at the push of a button (hold down = move, release = stop).
• Selection via the G button: The currently selected hydraulic system (front or rear) is always controlled.
• Automatic end positions: The system automatically sets the operating status at the end positions (e.g. for plowing or cultivating).
• Full compatibility: The original automatic lift/lower system remains fully functional.
• Realistic operation: The control system is only active when the engine is running.

Additionally, the automatic hydraulic lift function is disabled when attaching an implement. This setting can be toggled on or off via a button, but remains active until all attached implements have been detached and reattached. It is recommended to change this setting only when no implements are attached to the tractor.

Default controls (customizable in the menu):

• Numpad 8 = Raise
• Numpad 2 = Lower
• Numpad 5 = Toggle automatic lift on attach on/off