1 / 3
Virus checked
v1.0.0.0 latest
Free Mod
Machine Control
–
Rating
0 Ratings
0
Downloads
36
Views
0
Thanks
This mod is designed to make better use of the Moza Farming Control System (FCS) with compatible hardware. It should also work with similar peripherals that feature toggle switches.
Main Feature:
Shop configuration to select a hydrostatic drive – perfect for combines or forage harvesters. It enables stop-and-go braking as well as automatic direction reversal, so the throttle control of the FCS controller can be fully utilized. For non-hydrostatic vehicles, these options remain disabled.
Additional Features:
• Toggle switches behave like real toggle switches (e.g. PTO: up = on, down = off).
• Configurable key bindings in the controls menu to separate on and off functions.
• Drive and throttle have been separated – the vehicle moves at the engine RPM you set, while throttle is controlled via encoders or your own key bindings.
• A small HUD displays the stick input and shows whether throttle control is active or inactive.
• Raise and lower commands have been split into separate actions.
Important Note: When configuring the toggle switch bindings, overlaps may occur. After adjusting your bindings, save the game, exit, and restart – the mod will correct the duplicated binding on the next launch.
If controls do not work, check for overlapping key bindings.
Main Feature:
Shop configuration to select a hydrostatic drive – perfect for combines or forage harvesters. It enables stop-and-go braking as well as automatic direction reversal, so the throttle control of the FCS controller can be fully utilized. For non-hydrostatic vehicles, these options remain disabled.
Additional Features:
• Toggle switches behave like real toggle switches (e.g. PTO: up = on, down = off).
• Configurable key bindings in the controls menu to separate on and off functions.
• Drive and throttle have been separated – the vehicle moves at the engine RPM you set, while throttle is controlled via encoders or your own key bindings.
• A small HUD displays the stick input and shows whether throttle control is active or inactive.
• Raise and lower commands have been split into separate actions.
Important Note: When configuring the toggle switch bindings, overlaps may occur. After adjusting your bindings, save the game, exit, and restart – the mod will correct the duplicated binding on the next launch.
If controls do not work, check for overlapping key bindings.
Comments
You must be logged in to comment.
No comments yet.