Wind turbines Pack

Hello everyone!

This mod pack consists of a total of 255 placeable wind turbines from the manufacturers Enercon, Vestas, Nordex, GE Vernova and Vensys with different rotor diameters, hub heights and rated outputs.

All attachments have been converted from FS22 to FS25 and adjusted accordingly.

The following attachment platforms are included:

Enercon: Classic, EP1, EP2, EP3, EP4, EP5, EP8 and E-Nacelle

Vestas: 2MW, 4MW and EnVentus

Nordex: gamma and delta

GE Vernova: 2.x, 3.x and Cypress

Vensys

Features of the attachments:

-The price range is from 64.200€ to 803,250€ with rated outputs from 500kW to 7.58MW.

-The smallest rotor diameter is 40m, the largest 175m.

-hub heights from 42m to 179m.

-All turbines align themselves with the wind and change their speed depending on the wind speed.

-Anemometers are animated and adapt to the wind speed.

-Hindrance marking adapts to the light conditions in different seasons.

-The purchase price, as well as the revenue of the individual turbines, is calculated based on the defined nominal power, the length of the rotor blades and the height of the tower.

-It is possible to switch off ALL systems "visually". To do this, there is a trigger in front of the door at the foot of the tower of EACH turbine, where you can switch the turbines on and off using the left mouse button or the B button on the controller. This changes the rotor blade position and the rotor only spins slightly. The turbines still generate money, therefore only "visually". As far as I know, this cannot be implemented in any other way; after all, you have to bear in mind that FS25 is an agricultural simulation and not a wind power simulation.

-If there are several installations, you can switch between the variant with German obstacle marking or the one with international marking.

I have opted for completely white installations with daytime lighting during the day and tower and nacelle lighting at night. I am aware that this is not applicable to all countries, but many use this type of obstacle marking.

A second trigger has been added in front of the door at the base of the tower for this purpose. The trigger for switching the system on and off has been moved slightly to the left; the new trigger is oriented slightly to the right. The trigger zones "touch" each other on the central axis of the door. The right mouse button or the X button on the controller was selected as the input.

PLEASE NOTE:

After downloading, the file must be unpacked. The contained ZIP files can be moved to the mod folder.

I have tested all attachments after conversion. Nevertheless, errors may occur. If you notice any, please let me know and I will try to fix them as soon as possible.

These are not detailed illustrations of the real-life prototypes. Only the hub height, the rotor diameter and the rough appearance are based on the real images!

This mod pack may be posted on other websites as long as the download leads to the LS-Modcompany download link!!!

Have fun! If you have any questions or suggestions, please feel free to leave a comment!

-FSven-